Jump to content

Corpze

Beta Tester
  • Posts

    254
  • Joined

  • Last visited

Everything posted by Corpze

  1. Thanks for the nice comments, however, i am having a bit trouble of getting the right color on the stars, as you can see, they are a bit blue-ish. ​How do you handle the color-levels? Before stretch? After combining? Regards, Daniel
  2. First post here for me, would really like som input from you guys who have tons of experience. I have been using Pixinsight for a bit over a year and still learning. L and Ha 20x300s R,G,B 12x300s DDM85 Meade 102 APO (with a hint of bad collimation, ideal summer-project) - Subframeselector - Batch preprocessing - ABE, DBE when needed - Channel Combination - Masked MMT - Masked Deconvolution (Applied on both L, Ha and RGB) - HaLRGB combination - Permanent stretch - LRGB Combination - Curves /Daniel
  3. Hi, i was just curious of how often you really have to do a new Polar Align due to the precession. Another question i have been wondering over is if you have to do a new model for the autumn/spring or if you are good to go with a good model throughout the whole year? /Daniel
  4. Yes it is Working fine for me too, but only if i restart Sequence every night, otherwise, it won't park my scope ????
  5. Aha, so it basically a Safety monitor, not a weather monitor... I guess ASA has a bit of debugging to do :-/
  6. Hi, I am using a cloud and rain sensor (home built) that outputs Issafe or Isnotsafe through ASCOM. When I setup a new sequence, and press "Start @ time" in Sequence while the Safety Monitor reports "Not safe" - will Sequence wait until the conditions get "Safe" or will it abort? If it gets "Not safe" during a sequence, it will perform a "Close all" command right? But if it clears up say an hour after it has closed a sequence, will Sequence continue the sequence? (Probably not huh?) /Daniel
  7. Haha, i have watched the video several times but never noticed that Thanks for the heads up
  8. That should be very nice to get a comment from ASA, if it does calculates the "Superfit" from the drop-down menu or if you have to do a "manual" superfit from the "advanced" menu. (Auto slew .19) /Daniel
  9. And another thing, do you calculate fourier AND superfit or is it enough to calculate superfit?
  10. Wow Mark, that seems to be good numbers! are you getting this kind of accuracy every time you set up? i am impressed Have you tried Superfit? I am using a stationary setup so no PA for me I wrote down all the steps i did so i remember them next time i have to do a model (hopefully this model i did today will function to the autumn) Fresh restart of the computer Clear config Synch a star with Autoslew and planetarium Make an autopointfile - 25 degree min alt, 90 degree max alt, 10 degree grid in both RA and DE, pier side - both (in my case 110-ish stars) Load and calculate autopoint file Save the pointing file and "use now" Restart autoslew - Check that the new pointing file is in use! (Motors on, Homefind) Select and center a star with planetarium Synch with autoslew Set new home position This particular model gave me pinpoint accuracy when slewing, and with MLPT i have only tried 5min, but that was absolutely pin point stars. If anyone know how to calculate and apply the superfit, feel free to fill in And also, there is a setting in the autopoint - autogrid named "reference" on each East and West - what exactly does this function do? /Daniel
  11. Hi, yes i have seen it, but would really like to double check if i am thinking right. Clear configuration before calculating and applying the new model? /Daniel
  12. Hi, i am about to do a workflow with a video of how to do a superfit pointing model, but need some input. I have already a Working model with some stars, the pointing and tracking is good for 5-10 minutes. Last night, i did a 120 star autopoint file which i am about to use as a superfit. Is this the right workflow?; -open advanced pointing file -calculate and optimize polar, poiting, tracking etc. -Calculate and optimize superfit? -Apply new model - make a new homeposition Do i have to clear the old configuration at any point or do i apply the new one "on top"? /Daniel
  13. Well, i have to admit that I am happy with my DDM85, but i would not recomend ASA to a person looking for a premium mount. If i knew what i know today, i would go for a 10 Micron :-/
  14. Is there any documentation of the new Superfit function?
  15. I am getting these "errors"? Myself, what is this? /Daniel
  16. Thanks for your input Thats no problem, just set your target, run @ time and it glises everything when finished
  17. Hi, i was just wondering which park position "Sequence" is using when it is parking the scope and closes the session for the night? 1 or 2? /Daniel
  18. Ok.... this feels like searching for a couple of needles in a haystack, but here goes... from the windows logbook; 2016-02-12 01:18:38 - System time synced to machine clock (this might have screwed both autoslew and sequence up) 2016-02-12 01:18:39 - Network link is disconnected (should not have caused anything serious fault?) 2016-02-12 01:18:40 - Energy save mode restored (According to this event log, the computer went to sleep 2016-02-11 22:17:29....... sigh) I will bang the head against the wall one more time.... it is a LOT of settings hidden in windows 10 that needs to be switched to the right mode for us night-active creatures So - energy mode - Check Windows update - Check Windows Maintenence - Set to be activated during daytime instead of 02:00 - check Anything more? /Daniel
  19. Hi, i actually did and found some issued with the spp or something... Will check later, Windows 10 is kind of strange :-P I am on the phone right now but will check later.
  20. Hi, i woke up this morning to a shut down computer with this error: any clues what might have happened? I also have a log from Cl servo log that sais readin32 error something. But why the pc shutdown? (I have recently installed win10, maybe something with the updates?) Regards, Daniel 23:12:34.895: Interface setting TargetRightAscension to 6,29 False 23:12:34.941: Interface setting TargetDeclination to 22,53 True 23:12:34.973: Interface ForceNextPierSide = pierEast 23:12:34.973: Interface SlewToTargetAsynch 23:12:34.988: Starting Slew to RA 06,29h DE 22,53d EPOCH 0000 23:17:36.506: To long sleep of main timer, was reset by controltimer 23:17:36.560: AliveProgresscount stopped at 100 01:18:38.499: To long sleep of main timer, was reset by controltimer 01:18:38.515: AliveProgresscount stopped at 101 01:18:39.572: To long sleep of main timer, was reset by controltimer 01:18:40.628: AliveProgresscount stopped at 102 01:18:41.290: Interface setting TargetRightAscension to 6,26 False 01:18:41.322: Interface setting TargetDeclination to 19,15 True 01:18:41.353: Interface ForceNextPierSide = pierEast 01:18:41.353: Interface SlewToTargetAsynch 01:18:41.368: Starting Slew to RA 06,26h DE 19,15d EPOCH 0000 01:18:41.728: To long sleep of main timer, was reset by controltimer 01:18:41.728: AliveProgresscount stopped at 103 01:18:42.740: To long sleep of main timer, was reset by controltimer 01:18:42.740: AliveProgresscount stopped at 104 01:18:43.740: To long sleep of main timer, was reset by controltimer 01:18:43.740: AliveProgresscount stopped at 105 01:18:44.740: To long sleep of main timer, was reset by controltimer 01:18:44.740: AliveProgresscount stopped at 106 01:18:45.763: To long sleep of main timer, was reset by controltimer 01:18:45.763: AliveProgresscount stopped at 107 01:18:46.763: To long sleep of main timer, was reset by controltimer 01:18:46.763: AliveProgresscount stopped at 108 01:18:47.763: To long sleep of main timer, was reset by controltimer 01:18:47.763: AliveProgresscount stopped at 109 01:18:48.763: To long sleep of main timer, was reset by controltimer 01:18:48.763: AliveProgresscount stopped at 110 01:18:49.767: To long sleep of main timer, was reset by controltimer 01:18:49.767: AliveProgresscount stopped at 111 01:18:50.770: To long sleep of main timer, was reset by controltimer 01:18:50.770: AliveProgresscount stopped at 112 01:18:51.779: To long sleep of main timer, was reset by controltimer 01:18:51.779: AliveProgresscount stopped at 113 01:18:52.783: To long sleep of main timer, was reset by controltimer 01:18:52.783: AliveProgresscount stopped at 114 01:18:53.783: To long sleep of main timer, was reset by controltimer 01:18:53.783: AliveProgresscount stopped at 115 01:18:54.783: To long sleep of main timer, was reset by controltimer 01:18:54.783: AliveProgresscount stopped at 116 01:18:55.237: Axis RA/AZ reported the following Problem: ReadInt32 error was solved OK with Cycleport 01:18:56.134: To long sleep of main timer, was reset by controltimer 01:18:56.134: AliveProgresscount stopped at 100 01:18:57.134: To long sleep of main timer, was reset by controltimer 01:18:57.134: AliveProgresscount stopped at 101 01:18:59.310: To long sleep of main timer, was reset by controltimer 01:18:59.310: AliveProgresscount stopped at 100 01:19:00.341: To long sleep of main timer, was reset by controltimer 01:19:00.341: AliveProgresscount stopped at 101 01:19:00.694: Axis RA/AZ reported the following Problem: Position Error Position Error during slewing autocorrected by ClServo Position Error correction failed 01:19:00.865: Raising fatal Error RA Axis: Position Error Position Error during slewing autocorrected by ClServo Position Error correction failed 01:19:09.585: Interface setting TargetRightAscension to 6,88 False 01:19:09.616: Interface setting TargetDeclination to 21,74 True 01:19:09.648: Interface ForceNextPierSide = pierEast 01:19:09.663: Interface SlewToTargetAsynch 01:19:17.438: Interface setting TargetRightAscension to 6,29 True 01:19:17.485: Interface setting TargetDeclination to 22,53 True 01:19:17.516: Interface ForceNextPierSide = pierEast 01:19:17.516: Interface SlewToTargetAsynch 01:19:25.330: Interface setting TargetRightAscension to 6,29 True 01:19:25.376: Interface setting TargetDeclination to 22,53 True 01:19:25.408: Interface ForceNextPierSide = pierEast 01:19:25.408: Interface SlewToTargetAsynch 03:29:29.499: To long sleep of main timer, was reset by controltimer 03:29:29.499: AliveProgresscount stopped at 100 03:29:30.555: To long sleep of main timer, was reset by controltimer 03:29:30.680: AliveProgresscount stopped at 101 03:29:32.456: To long sleep of main timer, was reset by controltimer 03:29:32.456: AliveProgresscount stopped at 102 03:29:33.456: To long sleep of main timer, was reset by controltimer 03:29:33.456: AliveProgresscount stopped at 103 03:29:34.457: To long sleep of main timer, was reset by controltimer 03:29:34.457: AliveProgresscount stopped at 104 03:29:35.457: To long sleep of main timer, was reset by controltimer 03:29:35.457: AliveProgresscount stopped at 105 03:29:36.457: To long sleep of main timer, was reset by controltimer 03:29:36.457: AliveProgresscount stopped at 106 03:29:37.457: To long sleep of main timer, was reset by controltimer 03:29:37.457: AliveProgresscount stopped at 107 03:29:38.457: To long sleep of main timer, was reset by controltimer 03:29:38.457: AliveProgresscount stopped at 108 03:29:39.457: To long sleep of main timer, was reset by controltimer 03:29:39.457: AliveProgresscount stopped at 109 03:29:40.457: To long sleep of main timer, was reset by controltimer 03:29:40.457: AliveProgresscount stopped at 110 03:29:41.473: To long sleep of main timer, was reset by controltimer 03:29:41.473: AliveProgresscount stopped at 111 03:29:42.483: To long sleep of main timer, was reset by controltimer 03:29:42.483: AliveProgresscount stopped at 112 03:29:43.483: To long sleep of main timer, was reset by controltimer 03:29:43.483: AliveProgresscount stopped at 113 03:29:44.489: To long sleep of main timer, was reset by controltimer 03:29:44.489: AliveProgresscount stopped at 114 03:29:45.489: To long sleep of main timer, was reset by controltimer 03:29:45.489: AliveProgresscount stopped at 115
  21. that´s a close one, i am just installing all software on a new win10 computer, luckily, i saw this thread and got a heads up - Thanks Crister! Is there a way to shut these auto-updates off? It kinda feels like this is not the last time we will se this kind of related errors if win10 starts updating, restarting itself etc. /Daniel
  22. Same for me, i have also noticed that sequence isn't shut down properly sometimes. When checking my active processes seq32.exe is still running even after i have shut i down - it does seems that autoslew/sequence might have a problem closing connections as gmalits sais. (autoslew 5.2.1.9, sequence 0.2.0.9) /Daniel
  23. Yea, it is probably that way, but it would be nice to take a peak New tech is always fun to look at. /Daniel
×
×
  • Create New...