gmalits

Hi, I also have this phenomenon. But only if I connect directly via "Astro Optics Server Telescope". (from CCDAutopilot5) If I connect via Poth hub, everything is going well. Autoslew might have a problem with closing connections.

Hi Waldemar, thanks for the Information. seems to be a very viable solution!

Hi Waldemar, how many devices are attached via the Icron Ranger to USB?

hi Luc, good solution, i have also a green laser for pointing, or a focusser-board (for my C11, not for the ASA) on the moving weight..... prefetch, i think, luc uses this as an electronic finder ....not for guiding, for my own, i have never ever used an autoguider any more....

Hey Luc, how do you get good balancing in Dec ? a sliding weight on the top-dovetail?

Hi Guys, Thanks lukas, i will give it a try... Where ist this sequence-version, not in the beta-board, did philipp sent it directly to you?

Hey Lukas, where can i find the file ASCOM.AAGWare.SafetyMonitor.dll ?

Hi Lukas, sorry, i have never seen the mounts inside live ... but why dont give it a try by unpluging the burned pcb, if you dont need it. pull off the 2-line powercord and the usb-cable ...

Hi Lukas, this PCB ist the focuser-Controller, do you use this buit in feature ?. If not, disconnect it, and give the mount a try.

I measured your masterflat in CCD Inspector, the vignetting in the corner is over 60% ! Ithink, the flat cant compensate such strong vignetting. I also crop my pix....

Hi Ron, I think you are using 2" Filters, like me (mine is an atik 11000 with efw2 filterwheel, 2" screwed in filters), the vignetting is simlar to my setup. the chip ist ok, the filtersize ist the proplem in this fast f3.6 setup. is it possible to use large square filters (50x50 mm) with the build in filterwheel of the STL-11k? this would reduce the hard vignetting.

Hallo Norbert, I think the item# A2-8522DC is used for the DDM85 in the same way, as i built my adapter, the 4 holes are for the A2-DDM60LMGP Clamp. Of course one does not need this adapter to mount a C11 on the DDM85, simply a matching plate with matching blocks will do. only in my particular case of using the C11 with another mount (with losmandy clamp) too....

i am sorry, i messed something up, the ASA Dovetail is larger, about 5" (125 mm) !! i used this short 250 mm ASA Dovetail-Plate: http://www.astrosysteme.at/images/DDM85-DEC1B-250.PDF ....

Hello, you need a clamp (the ASA will do ..) , and you need a DDM 85 - Dovetailplate (4") .... plus a drill an some screws & nuts, of course ...

Hi, Mr. Noname As i am am using the C11 on a mobile setup too, i am using a 3"-Losmandy Dovetail-Plate on the C11. therefore I built an Adapter from the 4" Dovetail-Plate of the DDM85 to this Losmandy/Vixen Clamp.