deepsouthernskies

Thanks Mark. That’s really helpful.

Hi, ‘I was wondering if anyone knows the weight of the large and small counterweights for the ASA DDM85? Thanks

BTW, the product manual you supplied is fantastic and I wonder why it is not standard issue with new mounts.

Actually the other power cable is 0-48V and not 48V as I stated in my previous post so it was not supplied in error. My mistake.

Thanks for that. I will try the 12V cable but will endeavour to get the correct one if I can. I was also suppplied with a 48V power cable as well. This surely must be a mistake. You mentioned you have some older ASA files. Any information would be useful for me as I learn about this system. I am coming from the SW Bisque Paramount so a mount with absolute encoders is very new to me. Al

That is really helpful. Thanks so much. I clearly do not have the right power cable which is a great disappointment. I won't be powering the mount on till I get the right one. The supplied USB device also did not have the hardware manual which I had to track down on the ASA website.

Hi, I am in the process of setting up the ASA DDM85A for the first time and have found the hardware manual not adequately explaining some initial pre-requisites before powering on. I want to add my OTA and do a rough balancing before using AutoSlew for precise balancing. There are no details given in the manual as to how to engage/disengage the clutches. At the moment, the counterweight shaft swings freely while the DEC plate is locked, i.e., the RA clutch is disengaged and the Dec clutch is engaged. I have also been advised that the clutches should be disengaged before powering on. This is not mentioned in either the h/w manual or the AutoSlew manual. Regarding the power cable for the mount, I do not have the cable as shown in the manual with two leads (red and black) for connecting to the AC/DC adapter. Instead I have a (12V rated) cable with 4 leads (please see attached image). Can I safely ignore the two Ground leads? Any user willing to be patient with me while I get to grips with this mount would be most appreciated. Thanks, Al