admin Posted May 19, 2013 Report Share Posted May 19, 2013 This is a transfered topic from the ASA Yahoo Group. Posted By: georgecarey47 Wed Apr 24, 2013 7:13 pmI see that Autoslew 5116 is on the ASA website. The history has not been updatedyet - does anyone know what 5116 can do?________________________________Posted By: schmidmahler Wed Apr 24, 2013 11:49 pmI installed it yesterday to test (Update from 5.1.1.1). Everything works finewith my DDM60Pro as before. The only change that I have noticed so far is thesmaller window that pops up during slews (nice if you have a small monitor).An update of the version history document on the ASA Website would be welcome(last update with 5.1.1.1)! Another option would be a post in this forum.________________________________Posted By: tomtom2509 Thu Apr 25, 2013 10:43 amCan it be used by people who has the "Debug Assertion Error" with 5.1.1.2?Thx and BRThomas________________________________Posted By: jbaj82 Thu Apr 25, 2013 2:01 pmI believe 5112 fixed the Polar Aligment bug and 5114 fixed the Debug AssertionError. That's the reason I'm using 5114. I'm also curious about the releasenotes of 5116.________________________________Posted By: jbaj82 Wed May 1, 2013 9:17 pmI'm using 5114 to fix the Debug Assertion Error that I had with 5112. Cansomeone confirm that 5116 won't give me the Debug Assertion Error again? And anynews on the changes of 5116, is it only the slew popup that's different?Best regards,Jeffrey________________________________Posted By: jbaj82 Wed May 1, 2013 12:09 pmHi all,I want to update 5114 to 5116, but I want to be sure that I won't see the DebugAssertion Error, like I saw with 5112 (that's the reason for me to use 5114).Anyone using 5116 with success and also needed 5114 to fix the Debug AssertionError?Regards,Jeffrey________________________________Posted By: tomtom2509 Thu May 2, 2013 8:44 amHi Jeffrey,I tried 5116 yesterday. It was running fine over two hours without any errorsthan the clouds come in. So it seems all to be okay.I never get a feedback from ASA or Philipp what was responsible for the "DebugAssertion Error", just the in information that in a few hardware surroundingsthe problem appear.What I like in the 5116 in the first view is, that the "slewing-windows" havebeen repaired. Now I can see the movement of both axis again. And the windows issmaller.So I think you can try I without a risk.Best regardsThomas________________________________Posted By: nischangde Mon May 6, 2013 5:46 pmThomas,thank you for your try... with that in mind, I ran 5.1.1.6 last night, thoughPhilipp did not directly recommend it.And I noticed another detail: the bottom status bar shows the remaining "MLPTleft=" time. That is very nice !Due to I examined "first light" with a focal length of 1860 mm with the MLPTfunction last night, this detail is great.Now that the plate solving problems have been clarified (ref msg # 8265), I onlymade a 3 star polar align (had polar error below 1,6 in both Az and Alt afterthe second correction), then LPT recordings with 5 steps for an intended totalexposure time of 60 minutes, and got perfect circled stars in 15 minuteexposures afterwards !Thats the perfection I had in mind when going for the DDM drive (mine is aDDM60). Last night it came true.Clear skies to allMartin________________________________Posted By: philipp_keller Thu May 2, 2013 11:38 am (ASA STAFF) I think most people should wait for the next release which will also beimportant for the new Sequence.The new Sequence is now beeing tested on different mounts, looks good ! Link to comment Share on other sites More sharing options...
gmalits Posted July 3, 2013 Report Share Posted July 3, 2013 Are there clues as to when the new version will be available? At the CCDAutoPilot-forum, one user asked: "I wonder if at some stage it would be feasible for you to liaise with Philipp Keller (if he is willing) to script and automate via CCDAP5 the MLPT feature in his Sequence software for an ASA mount that is controlled via ASCOM/Autoslew.....?" Answer was: "Phillip Keller/ASA seem to be going a different direction now......" which will be probably exciting!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now