astrosirius

Hello Mark, Thank you for your comments. I am working with the uncropped version, when i finish I will post it. Best regards Luis https://www.flickr.com/photos/llromero/

M51 Whirlpool galaxy (Remote control from China - Teamviewer) This photo of the M51 have been done during my trip to China, during almost one month I could get enough photons to capture this amazing couple of galaxies. Since I have my own observatory with a remote control I have more time and chances to make astrophotografy from my home located at 200 km, but this time I have tried to do it from China by Teamviewer, this is it been a new challenge for me. when I went to bed, leaving the computer on without physical presence and this is the final result. Hope you liked it. This photo wouldn't be possible to make it without the help of my good friend Miguel Angel Borrella (http://observatoriosspag.es/index.php/es/) that some nights he enter to my computer to check if everything goes well, he also lives at 500 Km from my observatory, but during my trip, he was more near than me in case there was something strange happened like the unexpected closing the roof, but it seems the job is well done and the Talon6 is running perfectly. Àger-Lleida-Spain: Remote control from China Telescope: GSO RC14" Truss. Mount: ASA DDM85 XL (unguided) Camera: Moravian G2-8300 (5.4 um) resolució equip: 0.54"/px Focal reducer: AS CCDT67 0.67x Dates: 7-9-15-25-26 April i 3-May 2016 Exposures:L: 36x600 bin1 R:40x300 bin2 G:44x300 bin 2 B:31x300 bin2 i H-alpha:31x900 bin2 Software: Pixinsight Cropped: 60% SQM: 20.8 Best regards Luis Romero

Wooow I liked the crispy stars you have got it!!! Well done Daniel Luis

Thank you Thomas!! Luis

I am also working fine with it, but as Copze said, I also have to restart Sequence each night, but works very well. Anyway in parallel I have the "Talon6" robotic system, so even Sequence have problems to park the Scope, inmediatelly Talon do this job for me, thus I can go to sleep all the nights counting sheep . For more inform about the Robotic System Talon6, here you have the link: http://observatoriosspag.es/index.php/es/component/content/article/84-o-a-r-spag/361-talon6-2.html Best regards Luis

Thank you Antoino, especially for your great support!! Take care my friend!! Luis

Hi Mark, Congratulations for this beautiful image, I liked very much, curious object! Best regards Luis

Hi Mark, Thank you for your comments! I'm glad you like it!! Best regards Luis

Hello, This is my last photo of the NGC 4889 Come Berenices in the little constellation of Berenices. Best regards Luis www.astrosirius.org

Thank you George for your updated. I will take it into consideration!!

Hi Nak, I have using the DDM85XL with an GSO RC14" truss (F/L 2848 mm), thw CCD is the Moravian G2-8300 (5,4um), currently I am working with an Astro Physics CCD tele compressor CCDT67, so my resolution is 0.54"/px (2065 mm). Once I made the PA I got 12'x6', I am working with 10 min with "MLPT" without troubles, taking into consideration good seeing. Best regards Luis

Thank you George, Yes you are right, the problem is that to do this tutorial I have installed in another computer so I have had to restart everything, for sure if you mount is fixed this message won't appear. I will take into consideration for my next update.

Dear to everybody. I have made this simply but easy tutorial to following the steps to get the Polar Alignment with Autoslew. I have noticed that there are many people with doubts how to proceed with the Polar Alignment, thus I have decided to make it to help all everybody that need it this help. If you have considered that there is something wrong or need some amendment, please fell free to contact with me to update it. Note: I have written "Dummies" to justify that is easy to understand for all levels especially for beginners. I hope it be usefull. Best regards Luis Romero. www.astrosirius.org Visual Tutorial Polar Alignment for Dummies .pdf

Hello Dirk Have you checked in Menu of Autoslew the Flip Options? Maybe you have the option selected in "Stay on side instead" instead of "Prefer West" Best regards Luis Romero www.astrosirius.org

No problems detected with DDM85XL, Windows 7 (windows 32 bits) Best regards Luis

Hi Daniel, Have you seen this video enclosed in the forum? Last week I did a new Pointing moldel following the instrucions of this video and I have got a good results. http://forum.astrosysteme.com/index.php?/topic/665-making-of-an-automatic-pointingfile-with-a-asa-az800/ Best regards, Luis Romero. www.astrosirus.org

Well done!!! I liked very mucha, Congratulations. Lluís www.astrosirius.org

This is my last pictures made to M81 with my new setup. Telescope: GSO RC 14" Mount: DDM85S XL CCD: Moravian G2-8200 Exposures: L: 24x600 min + RGB: 12X300 min each channel. Processed: 100% Pixinsight. Best regards Luis Romero.

Hello Thomas, well done!! It is impressive to see how you take advantage of all your equipment. Congratulations. Best regards Luis.

Hello to eveybody, The last weekend I installed my new telescope that arrived from Germany, I was collimated and I did my first image, the results it seems atractives. Now I am waiting that the weather conditions improve to continue with the testings. Location: Àger-Lleida-Spain Robotic Observatory: System used "talon6" manufactured by http://observatoriosspag.es/index.php/es/ Mount: DDM85X-SL Telescope: GSO 14" Truss CCD: Moravian Instruments G2-8300 Telecompressor: Astro-physics CCDT67 Resolution: 0.54"/px Processing Soft: Pixinsight. Best regards Luis Romero www.astrosirius.org

Hi John, Congratulations for the amazing photo, I liked very much. May I know the exposure time for each filter? Best regards and happy new year.... with plenty of clear skies!! Luis Romero www.astrosirus.org

This is my first image after finish the instalation and setup the DDM85. Thank you Antonio to helping me to setup my mount.

Well Done Thomas, Superb image!! Nice equipment with very good results!! Luis,

Hi George, Yes I have done each time I switch on the mount. Today I have made a pointing model with 22 stars (45 Horizon and 60º Dec) In one of the position has appeared the same message and the mount lost the position. I will do it, thank you for your recommendation. B.r Luis