astrosirius

Hello Denis, Thanks a lot for your help. I read yesterday night your message and I restart the Autopoint with 23 Stars, the results has been quite good!! I introduced 40º Horizont and 60º in Altitude to make the model in sequence. But still in some point appears the message, anyway I will try to reduce the values o get better results. I will let you know it the final result. Lluís Romero. http://www.flickr.com/photos/llromero/

Hello to everybody, Someone have had this kind of message? " Wrong Encoder Position Error" When I want to do a Autopoint with 84 stars in some positions the mount lose the Encoder position and once I want to do a Park home, the mount it goes where it want. I will appreciate your comments about this Issue. B.r Lluís Romero. http://www.flickr.com/photos/llromero/

Hello to everybody, Someone have had this kind of message? " Wrong Encoder Position Error" When I want to do a Autopoint with 84 stars in some positions the mount lose the Encoder position and once I want to do a Park home, the mount it goes where it want. I will appreciate your comments about this Issue. B.r Lluís Romero. http://www.flickr.com/photos/llromero/

Hello Lukas, I loose all the connected USB devices, not only the mount. This weekend I have removed the USB cables connected to the CCD and the focuser and I have installed this device: http://www.silexeurope.com/en/home/products/usb-device-servers/sx-ds-4000u2.html that is much better than the Icron, the problem have been solved, but still the mount lost the USB near the meridian, but I think is an issue adjusting the calibration of the motors. What a pitty...but the USB devices that are included in the DEC are really not functional, I have planning to buy another Silex to connect the Mount directly removing the Icron, this device is much quick and a reliable. I will keep you informed about my evolution. Best regards Lluis Romero. https://www.flickr.com/photos/llromero/ http://www.astrosirius.org/

Hello George, I am going to revise the (PID) configuration this weekend, I prefer to be in the observatory personally, because at 200 km from home vía remote control is not easy to evaluate the (PID), I need to be there to hear the humming sound. Thank you for your recomendation! Clear Skies Lluís http://www.flickr.com/photos/llromero/

Hello Mark, I will revise the (PID) configuration this weekend, I prefer to be in the observatory personally, because at 200 km from home vía remote control is not easy to evaluate the (PID), I need to be there to hear the humming sound. Clear Skies Lluis http://www.flickr.com/photos/llromero/

Hi Christer, Thanks a fot for your comments, I appreciate too much your suggestions. I will take into consideration, first of all I want to check first the configuration for the high speed passing the meridian. Br, Lluis

Hello to everybody I am having a lot of problems with the loss of connectivity...I have changed my computer as per a new one, I also bought and installed an Icron, after this changes, the problem continues having the same problem, so I decided to change all the USB cables with golden plating...but the problem still. Somebody can help even the ASA people? The problem is this one: Each time the mount through the meridian makes a humming sound or even vibrating, it's just in that point when sometimes USB connection lost. Since the mount arrived on Sep 2015 I could not do anything and I begin to giving up. Somebody can help me? Note: I attached some picture to show you my installation...maybe you can find something to help. The computer is around 4 mts from the Pier. Best regards Lluis Romero

Hello to everybody I am having a lot of problems with the loss of connectivity...I have changed my computer as per a new one, I also bought and installed an Icron, after this changes, the problem continues having the same problem, so I decided to change all the USB cables with golden plating...but the problem still. Somebody can help even the ASA people? The problem is this one: Each time the mount through the meridian makes a humming sound or even vibrating, it's just in that point when sometimes USB connection lost. Since the mount arrived on Sep 2015 I could not do anything and I begin to giving up. Somebody can help me? Note: I attached some picture to show you my installation...maybe you can find something to help. The computer is around 4 mts from the Pier. Best regards Lluis Romero

Helo Daniel, I am very happy to hear you that finally you have solved the problem!! Clear Skies!! Luis Romero

Hello Daniel and Jyrki, I have had a lot of problems with Seletek autofocus with Sequence, here you have the steps I did to recognize the Seletek without problems. 1.- If you have already installed the Sequence, please try to uninstall. 2.- Delete complete the folter ASA located here: C:\ProgramData\ASA\Sequence\PersonalSettings (the most important thing is to remore the ini-file) 3.- Before to Install Sequence, please install the last drivers from seletek (in case you need it) located here: http://lunatico.es/ourproducts/seletek-armadillo-platypus/moreinfo/firmware-and-software.html 3.1: I have installed: Current version: software 4.5.1 - drivers 2.2 - and firmware 3.3 4.- Install Sequence version: 0.2.0.8 5.- Setup all the parameters 6.- Try to run Autofocus...I hope you have lucky with my help. Please come back to me if you have more doubts or hesitates. Best regards, Luis Romero. www.astrosirius.org https://www.flickr.com/photos/llromero/

Hi Daniel, how are you!! I have found the issues about your trouble, I don't how to post image here to help you, for that reason, please try to get in touch me by email at: astrosirius@astrosirius.org Waiting your soon!! Best regards, Luis Romero.

The last time I used the autofocus with the Moravian G2 it worked with Sequence 0.2.0.8 "don`t use Redoutmodes" => Activated Regards, Luis

Helllo Thomas, First of all, congratulations for your new setup with the FLI ML8300, I really liked very much the latest image made from this CCD. By the way, I also liked it a lot your web site. I have noticed that you have a good processed to treat the images. Best regards, Luis Romero. https://www.flickr.com/photos/llromero/ http://www.astrosirius.org/

Well done Antonio, I liked very much! Superb is a Stunning image! The colour calibration is perfect, as well as the noise reductions is well done. Congratulations. See you soon! Luis Romero https://www.flickr.com/photos/llromero/ http://www.astrosirius.org/

Hello Ron, amazing image of this nebula. Have you already done the tutorial to the processed this image? I liked very much! Good color calibration and better extraction of the tiny details. Best regards Luis Romero,

Great image Antonio!! Best regards from China!! Luis Romero http://www.flickr.com/photos/llromero/

Well done Mark! The stars are with a great pinpoint sharpness. I liked how made the color calibration. Clear Skies. Luis

Well done Ron, I liked very much. And thanks as well for your detailed tutorial how to processing the M100 with Pixinsight. Clear skies, Luis https://www.flickr.com/photos/llromero/

Beautifull Ron!! Congratulations for this great shoot. I am awaiting to receive my new mount DDM85. I wish you have a nice weekend. Luis Romero. https://www.flickr.com/photos/llromero/

Hello Ron, Congratulations for the award!! I liked very much, it seems your mount is guiding perfectly. I liked the colours calibration stars. Are you working unguided? I have already bought a DDM85XL-S, I am waiting to receive in a few months. Best regards Luis Romero. www.astrosirius.org